Effect V4 Overload Single Block Guitar Effect Pedal, Tone Overload Monoblock

USE DC 9V power supply!!! This pedal is warm enough to keep your high-quality guitar and amplifier timbre. Overload design is used to use the amplifier under reasonable settings to make it sound like the sound of natural driving to pure and smooth electron tube distortion. It's actually two overload pedals in a box, with a separate pedal on each side. They are the same except for setting the dip switch. Having two actual overload circuits allows you to use two pedals in series (stacked) at the same time to obtain more possible tones and drive levels. Each side has its own volume, drive and tone control, and there is a treble increase knob on the inside of the pedal. This is a small knob or fine-tuning potentiometer that can be turned by hand or with a pick or small screwdriver.

There is also a four position configuration dip switch inside, which you can use to select between clean, OD and dispersion modes on each side. It is a pair of two switches, two on the left for the red side and two on the right for the yellow side. You can set either side to normal od mode or clear mode by moving the OD / clear dip switch (switch 1 or 3).

You can use the dist dial switches (2 and 4) to set either side to additional distortion. When you turn on one of these dist switches, you get significantly more and more distortion, but the volume decreases a little.

When dist switch is on, you cannot obtain normal od or clear mode on this side. There are three modes: 1 Od mode: This is the standard King of tone. 2 Clean mode: this mode has less driving force and can be used for cleaning, enhancement or clearer and louder sound. 3 Distortation mode: this mode has more driving force than the standard od mode - a little hard distortion.

Sound is more compressed, but retains its characteristics. This device is the highest version, that is, BOTH HIGH GAIN SIDE. The high gain here is only about 15% more than that of normal gain. It is not suitable for playing heavy metal!! On the basis of the original version, two shift switches are added, which can switch between the standard version and the high gain version, so as to realize more voice color selection on this pedal!

When you turn on one of the dist switches, you will get more and more distortion, but the volume will drop slightly. When dist switch is on, you cannot get normal od or clear mode on this side.